LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2012 >> 300 SRT-8 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Fan, Cooling >> Installation >> 3.6L Dual Fan
April 5, 2026: LEMON Manuals is launched! Read the announcement.

3.6L Dual Fan

Fig 1: Fan Motor Wiring Harness, Fan Shroud, Fan Blade & Bolts
GC0144322Courtesy of CHRYSLER GROUP, LLC
  1. Install the fan blade (4) to the fan motor. Tighten the nut (3) to 6 N.M (50 in. lbs.).
  2. Position the fan motor assembly to the shroud (6).
  3. Install the bolts (2) that support the fan motor to the shroud. Tighten the nut (3) to 6 N.M (50 in. lbs.).
  4. Route the fan motor wiring harness (5) through the fan shroud (6).
    Fig 2: Radiator Cooling Fan Assembly & Radiator Mounts
    GC0144489Courtesy of CHRYSLER GROUP, LLC
  5. Position radiator cooling fan assembly (1) in vehicle.
  6. Guide the fan (1) into the lower radiator mounts (2).
    Fig 3: Cooling Fan Electrical Connector, Cooling Fan Mounting Bolts & Radiator Cooling Fan Assembly
    GC0144533Courtesy of CHRYSLER GROUP, LLC
  7. Install cooling fan mounting bolts (2). Tighten to 6 N.m (50 in. lbs.)
  8. Connect cooling fan electrical connector (1).
  9. Install the air filter housing. Refer to BODY, AIR CLEANER, INSTALLATION or BODY, AIR CLEANER, INSTALLATION, 5.7L or BODY, AIR CLEANER, INSTALLATION .
  10. Connect the negative battery cable.
  11. Operate engine until it reaches normal operating temperature.
scientia non olet · About LEMON Manuals