5.7L Dual Fan

Fig 1: Fan Motor Wiring Harness, Fan Shroud, Fan Blade & Bolts

Courtesy of CHRYSLER GROUP, LLC

Install the fan blade (4) to the fan motor. Tighten the nut (3) to 6 N.M (50 in. lbs.).
Position the fan motor assembly to the shroud (6).
Install the bolts (2) that support the fan motor to the shroud. Tighten the nut (3) to 6 N.M (50 in. lbs.).
Route the fan motor wiring harness (5) through the fan shroud (6).

Fig 2: Radiator Cooling Fan Assembly & Radiator Mounts
Courtesy of CHRYSLER GROUP, LLC
Position radiator cooling fan assembly (1) in vehicle.
Guide the fan (1) into the lower radiator mounts (2).

Fig 3: Cooling Fan Electrical Connector, Cooling Fan Mounting Bolts & Radiator Cooling Fan Assembly
Courtesy of CHRYSLER GROUP, LLC
Install cooling fan mounting bolts (2). Tighten to 6 N.m (50 in. lbs.)
Connect cooling fan electrical connector (1).

Fig 4: Upper Radiator Hose
Courtesy of CHRYSLER GROUP, LLC
Install the upper radiator hose.
Install the air filter housing. Refer to BODY, AIR CLEANER, INSTALLATION or BODY, AIR CLEANER, INSTALLATION, 5.7L or BODY, AIR CLEANER, INSTALLATION .
Fill the cooling system. Refer to STANDARD PROCEDURE .
Operate engine until it reaches normal operating temperature.