LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2017 >> Pacifica Hybrid Platinum >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 30 (Circuit Testing Procedures - Non-DTC-Based Diagnostics) >> Installation >> Connector Terminal Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Connector Terminal Installation

WARNING: This page is about a different variant/trim than selected.
  1. Select a wire from the terminal repair kit that best matches the color and gauge of the wire being repaired.
  2. Cut the repair wire to the proper length and remove one-half (1/2) inch of insulation.
  3. Splice the repair wire to the wire harness (see WIRE SPLICING  ).
  4. Insert the repaired wire into the connector.
  5. Install the connector locking wedge, if required, and reconnect the connector to its mating half/component.
  6. Re-tape the wire harness starting at 1-1/2 inches behind the connector and 2 inches past the repair.
  7. Connect battery and test all affected systems.
scientia non olet · About LEMON Manuals