LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2017 >> Pacifica Hybrid Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Electronic Control Modules (Service Information)) >> Module, Emergency Assistance (EAM) >> Removal And Installation >> Removal And Installation - Emergency Assistance Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation - Emergency Assistance Module: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Position the EAM to the EAM mounting bracket.
  2. Install and tighten the four screws for the EAM. Tighten the screws securely.
  3. Connect the instrument panel wiring harness connectors.
  4. Install the switch bank pod. Refer to POD, SWITCH BANK, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals