LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2017 >> Pacifica Hybrid Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Electronic Control Modules (Service Information)) >> Module, HVAC >> Removal And Installation >> Rear >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Rear: Installation

WARNING: This page is about a different variant/trim than selected.
NOTE:

Illustration shown with instrument panel removed from view for clarity.

GC0177624Courtesy of CHRYSLER GROUP, LLC
  1. Position the HVACR module (2) to the housing.
  2. Install and tighten the two HVACR module to the housing screws (1).
  3. Connect the HVACR module electrical connector (3).
  4. Install the right rear quarter trim panel. Refer to PANEL, QUARTER TRIM, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
  6. Initiate the Actuator Calibration function using a scan tool. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals