LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2017 >> Pacifica Hybrid Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Electronic Control Modules (Service Information)) >> Module, Powertrain Control (Pcm) >> Removal And Installation >> Removal And Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Installation

WARNING: This page is about a different variant/trim than selected.
GC0177695Courtesy of CHRYSLER GROUP, LLC
  1. Position and seat the PCM to the PCM bracket (1).
    GC0178213Courtesy of CHRYSLER GROUP, LLC
  2. Install and tighten the three retaining nuts (1) securing the PCM to the PCM bracket.
    GC0177838Courtesy of CHRYSLER GROUP, LLC
  3. Connect and lock the electrical connectors (1) to the PCM.
  4. Install the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable.
    NOTE:

    If a new PCM is installed, it must be programed with the original Vehicle Identification Number (VIN) and mileage and flashed with the correct software for the application. If this is not done, a Diagnostic Trouble Code (DTC) may set.

  6. If a new PCM is being installed, use a scan tool and program the new PCM with the original VIN and vehicle mileage and flash with the correct software for the application.
scientia non olet · About LEMON Manuals