LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager L, Gas >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Driveline Module >> Sensor, Pressure >> Removal And Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal And Installation

REMOVAL 

GC0200283Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the wire harness connector from the pressure sensor (1).
  2. Remove the pressure sensor from the Rear Drive Module (RDM) housing.

INSTALLATION 

GC0200283Courtesy of CHRYSLER GROUP, LLC
  1. Replace the pressure sensor with pre-applied sealant to the threads.
  2. Tighten the pressure sensor to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
  3. Connect the pressure sensor wire harness connector (1).
scientia non olet · About LEMON Manuals