Module, Drivetrain Control (DTCM): Installation

Courtesy of CHRYSLER GROUP, LLC

1. Position the Drivetrain Control Module (DTCM) (3) onto the mounting studs (5) and (6).
2. Install the DTCM mounting fasteners (2) and (4) and tighten to the proper torque specification. Refer to TORQUE SPECIFICATIONS  .
3. Secure the driver footwell carpet back to its installed position.
4. Install the cowl side trim panel (1). Refer to PANEL, COWL TRIM, INSTALLATION .
5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.