Torque Specifications
WARNING: This page is about a different car, the 2025 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Ball Joint to Lower Control Arm Nut | 75 | 55 | - | |
| Front Hub and Bearing Bolts (AWD) | 20 + 180° | 15+ 180° | - | Do NOT reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Front Hub and Bearing Bolts (FWD) | 98 | 72 | - | Do NOT reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Front Stabilizer Bar Bolts | 60 | 44 | - | |
| Hub Nut (FWD/AWD) | 160 | 118 | - | Do NOT reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Lower Ball Joint Pinch Bolt and Nut | 50 | 37 | - | |
| Lower Control Arm Front Bolt | 110 + 97° | 81+ 97° | - | Do NOT reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Lower Control Arm Rear Bolt | 130 + 97° | 96 + 97° | - | Do NOT reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Stabilizer Bar Link Nuts | 80 | 59 | - | Do NOT reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Steering Knuckle Pinch Bolt | 50 | 37 | - | Do NOT reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Strut Upper Mount Bolts | 60 | 44 | - | |
| Strut Lower Bolts | 80 + 97° | 59 + 97° | - | |
| Strut Rod Nut | 70 | 52 | - |