Wheel Alignment (Procedures): Toe-In

Position wheels in straight-ahead position. If toe-in is not within specifications, loosen locking nuts on tie rod turn buckles. To adjust, rotate turn buckles until toe-in is within specifications. Tighten lock nuts.

NOTE: Adjustment must be made equally to both sides of vehicle to maintain correct wheel lock angles; difference of tie rod length when adjusted should not exceed 0.20".

WHEEL ALIGNMENT SPECIFICATIONS

Application

Caster (Degrees)

Camber (Degrees)

Toe-In (Inches)

Toe-Out On Turns (Degrees)

Inner

Outer

Colt

⁽¹⁾1 1/4 ± 1/2

⁽¹⁾5/6 ± 1/2

5/64 to 15/64

⁽²⁾36 to 39

⁽³⁾29 to 32

⁽¹⁾	Max. variation between wheels 1/2°.

⁽²⁾	Difference between right and left wheels within 2°.

⁽³⁾	Difference between right and left wheels within 1°.