Spark Control Computer Spark Test
- Warm engine to normal operating temperature. Disconnect carburetor switch or unground it. Be sure coolant temperature sensor is connected and working properly.
- Remove and plug vacuum hose at vacuum transducer. Connect an auxiliary vacuum supply to vacuum transducer and apply 16 in. Hg. Increase engine speed to 2000 RPM and wait 1 minute before checking specifications. Advance specifications are in addition to basic advance. See Spark Advance Test Specifications table.
- If computer fails to obtain settings, replace computer.
SPARK ADVANCE TEST SPECIFICATIONS - 2.2L
| Application |
Computer Part No. |
Advance |
| Federal |
5226176 |
39° |
| California |
| M/T |
5226124 |
41° |
| A/T |
5226178 |
40° |
| High Altitude |
| M/T |
5226118 |
42° |
| A/T |
5226166 |
38° |