Spark Control Computer Spark Test
- Bring engine to normal operating temperature ensure that basic ignition timing is properly adjusted. Be sure coolant temperature sensor is connected and working properly.
- Remove and plug vacuum hose at vacuum transducer. Connect an auxiliary vacuum supply to vacuum transducer and apply 16 in. Hg. Increase engine speed to 2000 RPM and wait 1 minute before checking specifications. See Spark Advance Test Specifications table. Specifications given in table are TOTAL advance (initial advance is included).
- If computer fails to obtain settings, replace computer.
SPARK ADVANCE TEST SPECIFICATIONS - 2.2L
| Application |
Computer Part No. |
Advance |
| High Altitude (Auto) |
5226499 |
39° |
| Federal |
| Automatic |
5226497 |
42° |
| 4-Spd Manual |
5226589 |
39° |
| 5-Spd Manual |
5226587 |
39° |
| California |
| Automatic |
5226465 |
42° |
| Manual |
5226591 |
42° |