Motor Switch
Remove switch. Using an ohmmeter, check continuity with switch in the "OFF", "UP" and "DOWN" position. Continuity should be available between pins as listed in POWER WINDOW SWITCH TESTING - FWD or POWER WINDOW SWITCH TESTING - RWD . See Fig 1 . If correct value is not obtained, replace switch.
POWER WINDOW SWITCH TESTING - FWD
| Switch Position | Continuity | |
|---|---|---|
| Left Door | ||
| Off | Pins 1 & 2 | |
| Pins 2 & 3 | ||
| Pins 2 & 4 | ||
| Pins 2 & 6 | ||
| Up (Left) | Pins 1 & 2 | |
| Pins 4 & 5 | ||
| Up (Right) | Pins 5 & 6 | |
| Pins 2 & 3 | ||
| Down (Left) | Pins 1 & 5 | |
| Pins 2 & 4 | ||
| Down (Right) | Pins 3 & 5 | |
| Pins 2 & 6 | ||
| Right Door | ||
| Off | Pins 1 & 4 | |
| Pins 2 & 5 | ||
| Up | Pins 2 & 3 | |
| Pins 1 & 4 | ||
| Down | Pins 3 & 4 | |
| Pins 2 & 5 | ||
POWER WINDOW SWITCH TESTING - RWD
| Switch Position | Continuity | |
|---|---|---|
| Left Door | ||
| Off | Pins 1 & 2 | |
| Pins 2 & 3 | ||
| Pins 2 & 4 | ||
| Pins 2 & 6 | ||
| Up (Left) | Pins 3 & 5 | |
| Pins 2 & 6 | ||
| Up (Right) | Pins 1 & 5 | |
| Pins 2 & 4 | ||
| Down (Left) | Pins 5 & 6 | |
| Pins 2 & 3 | ||
| Down (Right) | Pins 1 & 2 | |
| Pins 4 & 5 | ||
| Right Door | ||
| Off | Pins 1 & 4 | |
| Pins 2 & 5 | ||
| Up | Pins 3 & 4 | |
| Pins 2 & 5 | ||
| Down | Pins 2 & 3 | |
| Pins 1 & 4 | ||