Throttle Position Sensor/Switch: Installation
Install TPS on throttle body. Tighten mounting screws. See TPS TORQUE SPECIFICATIONS table. Connect TPS electrical connector. Install air cleaner (if removed). Connect negative battery cable.
TPS TORQUE SPECIFICATIONS
| Application | INCH Lbs. (N.m) |
|---|---|
| 2.5L TBI | 20 (2.3) |
| 2.5L Turbo, 3.0L & 3.3L | 17 (2.0) |
| 3.9L, 5.2L & 5.9L | 27 (3.0) |