Select Module Menu
Menu will display body control systems available for technician to diagnose. Select appropriate body system to be tested. DRB-II will then display a menu for specific system being tested. Following functions are accessible from each system menu:
- System Tests
This function allows technician to determine whether Single Board Engine Controller (SBEC) is active over CCD bus. - Read Faults
This functions allows technician to read faults. If no faults exist, NO FAULTS DETECTED will be displayed. If faults exist, DRB-II will display number of faults, fault code and message. - State Display
This functions allows technician to read states or values of a variety of sensors, inputs/outputs and components. - Actuator Tests
This function allows technician to activate various outputs, motors and relays to test their operation. - Adjustments
This function allows the technician to change vehicle theft alarm system mode from disarmed to armed, or to put alarm system in self-diagnostics mode. Adjustments function is not available for testing of other body control modules.