LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 1992 >> Stealth Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Engine Sensors & Switches >> Idle Position Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Idle Position Switch

  1. Disconnect Throttle Position Sensor (TPS) connector. Connect ohmmeter between TPS connector terminals No. 1 and 2 on Diamante DOHC (terminals No. 3 and 4 on Diamante SOHC, Stealth and 3000GT). See Figure .
  2. With accelerator pedal pressed, no continuity should be present. With accelerator pedal released, continuity should be present. If idle switch continuity is not as specified, replace TPS.
scientia non olet · About LEMON Manuals