LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 1993 >> Intrepid Base, 3.3 T >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - Body Control Computer >> Connector Identification >> Test 41A - Inoperative (Courtesy Light) Bulb
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test 41A - Inoperative (Courtesy Light) Bulb

NOTE: For connector terminal identification, see CONNECTOR IDENTIFICATION  . For appropriate wiring diagram, see WIRING DIAGRAMS  at end of article.

Remove inoperative (courtesy light) bulb. If bulb filament is open, replace bulb. Perform VERIFICATION PROCEDURE VER-1. If bulb filament is okay, disconnect inoperative light assembly. With DRB-II in voltmeter mode, check voltage on light assembly connector fused battery feed circuit (Pink wire). If voltage is more than 10 volts, repair open ground circuit for inoperative light assembly. Perform VERIFICATION PROCEDURE VER-1. If voltage is less than 10 volts, repair open circuit in Pink wire to inoperative courtesy light. Perform VERIFICATION PROCEDURE VER-1.

scientia non olet · About LEMON Manuals