Test 20C - Repairing Power Door Lock Problems W/ RKE
CAUTION:
Always turn ignition off prior to disconnecting or connecting any module connector.
NOTE:
RKE module may be accessed by carefully prying each end of instrument panel top cover and sliding cover forward to disengage front clips.
- Gain access to Remote Keyless Entry (RKE) module. RKE module is located under instrument panel top cover, behind information center. Disconnect RKE module Black connector. Go to next step.
- Connect a jumper wire between ground circuit (Black wire) and LF door unlock driver circuit (Dark Blue wire) at RKE module Black connector. Depress door lock switch to LOCK position. If LF door operates, replace RKE module. Perform TEST VER-1B . If LF door lock does not operate, repair open Black wire. Perform TEST VER-1B.