LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 1994 >> Caravan Base, 3.3 J >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - Body Control Computer >> Verification Test >> Test VER-1 - Verification Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test VER-1 - Verification Procedure

  1. Ensure ignition is off and DRB is connected. Reconnect all previously disconnected components and connectors. Turn ignition on. If DRB screen is blank, go to TEST 2A. If DRB screen is not blank, go to next step.
  2. If there is a BUS failure message on DRB, go to TEST 1A. If there is no BUS failure message on DRB, select module in question. If DRB shows NO RESPONSE, go to TEST 1A.
  3. If DRB does not show NO RESPONSE, inspect vehicle for original complaint. If original complaint is present, go to TEST 1A. If original complaint is not present, repair is complete.
scientia non olet · About LEMON Manuals