Test SC-6A - Checking Speed Control Denied Messages: Notes
WARNING: This page is about a different car, the 1995 Dodge Pickup and 1995 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
At this point, speed control switch and servo are functioning properly. Using DRB, monitor speed control cutout status. Road test vehicle at speeds exceeding 35 MPH and attempt to set speed control. The following items will not allow speed control to set. The last or most recent cause for speed control not setting is indicated by the Denied Message. The Denied Messages are as follows: