LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 1994 >> Intrepid Base, 3.3 T >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel System Pressure Release >> Throttle Body Injection (TBI)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Throttle Body Injection (TBI)

  1. Slowly open fuel tank cap to release pressure in tank. Disconnect injector 2-pin connector at edge of throttle body. Connect a jumper wire between injector connector (injector side) Dark Green/Orange wire and battery positive terminal.
  2. Connect another jumper wire to injector connector (injector side) White/Dark Blue wire. Momentarily ground jumper wire connected to White/Dark Blue wire no more than 5 seconds. Injector will energize (open), relieving fuel pressure. Remove jumper wires. Fuel pressure is now released.
scientia non olet · About LEMON Manuals