LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 1994 >> Intrepid Base, 3.3 T >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Controls - Tests W/Codes - Body Control Computer (Convert)) >> Diagnostic Procedure >> Entering On-Board Diagnostics >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Entering On-Board Diagnostics: Notes

WARNING: This page is about a different car, the 1994 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before entering on-board diagnostics, refer to PRETEST INSPECTION  . Turn ignition off. Attach appropriate 1994 cartridge to DRB. Connect DRB to data link connector. See Figure .
  2. Turn all accessories off. Turn ignition on. All character positions will glow and copyright information will appear on DRB screen for a few seconds. Display will then change to DRB menu.
  3. If DRB displays an error message or if screen is blank, refer to VEHICLE COMMUNICATIONS  (ALWAYS start at TEST 1A). Testing of NO RESPONSE messages may be found in appropriate BODY CONTROL MODULE TESTS.
  4. The following DRB modes can be accessed from DRB menu: VEHICLES TESTED, HOW TO USE, CONFIGURE and SELECT SYSTEM.
scientia non olet · About LEMON Manuals