Diagnostic Procedure: Notes

WARNING: This page is about a different car, the 1994 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before proceeding with diagnosis, certain precautions must be followed. See PRETEST INSPECTION under SELF-DIAGNOSTIC SYSTEM.

Diagnostic test procedures are designed to detect system faults as quickly as possible. Body trouble codes are accessed through Data Link Connector (DLC). See Figure . Chrysler's Diagnostic Readout Box (DRB) is used to access information from DLC.

A 1994 diagnostic program cartridge, DRB, body diagnostics cable, hand-held oil pressure gauge, jumper wires, and digital volt-ohmmeter will be needed for testing. Proceed to TEST 1A in BODY CONTROL COMPUTER TESTS.

Ensure self-diagnostic tests apply to vehicle being tested. See BODY CONTROL COMPUTER TESTS DIRECTORY table. When system problem is identified according to customer's complaint, perform diagnostic test indicated.