LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 1994 >> Intrepid Base, 3.3 T >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Controls - Tests W/Codes - Body Control Computer (Convert)) >> Self-Diagnostic Tests >> Test 63B - Repairing No Chime Function
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test 63B - Repairing No Chime Function

WARNING: This page is about a different car, the 1994 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For connector terminal identification, see CONNECTOR  IDENTIFICATION. For wiring diagram, see WIRING DIAGRAMS  . Perform TEST VER-1 after each repair.
CAUTION: Always turn ignition switch to OFF position prior to disconnecting or connecting any module connector.
  1. Close all doors. Turn ignition switch to ON position, engine off. Using DRB, actuate chime test. If chime does not sound, replace Body Control Module (BCM). If chime sounds, go to next step.
  2. Using DRB, read key in ignition status. If DRB displays KEY IN IGN : CLOSED, replace BCM. If DRB does not display KEY IN IGN : CLOSED, go to TEST 64G.
scientia non olet · About LEMON Manuals