Test 148A - Repairing Right Front Door Ajar Switch Circuit
NOTE:
Perform TEST 141A
before proceeding with this test. For connector terminal ID, see CONNECTOR IDENTIFICATION
. For wiring schematics, see WIRING DIAGRAMS
in this article. Perform TEST VER-3A - VERIFICATION PROCEDURE
after each repair.
CAUTION:
Always turn ignition off prior to disconnecting any module connector.
Ensure all doors are closed. Using scan tool, read door ajar switch status. If scan tool displays DOOR AJAR: CLOSED, go TEST 40B . If scan tool does not display DOOR AJAR: CLOSED, go to TEST 40A.