Verification Procedure VER-1
WARNING: This page is about a different car, the 1993 Dodge Dynasty, 1993 Chrysler New Yorker Fifth Avenue, 1993 Chrysler New Yorker, and 1993 Chrysler Imperial. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure ignition is off and DRB-II is connected. Turn ignition on. If DRB-II screen is blank, go to TEST 2A. If DRB-II screen is not blank, go to next step.
- If there is a bus failure message on DRB-II, go to TEST 1A. If there is no bus failure message on DRB-II, select module in question. If DRB-II shows NO RESPONSE, go to TEST 1A.
- If DRB-II does not show NO RESPONSE, inspect vehicle for original complaint. If original complaint is present, go to TEST 1A. If original complaint is not present, repair is complete.