Test 31B - EVIC Panel Switch Test
WARNING: This page is about a different car, the 1994 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For connector terminal identification, see CONNECTOR IDENTIFICATION
. For wiring diagram, see WIRING DIAGRAMS
. Perform TEST VER-1 after each repair.
Raise and support vehicle. Using DRB, read Vehicle Speed Sensor (VSS) signal. Start engine. Place shift lever in gear. Gradually accelerate vehicle. If DRB displays increasing speed as vehicle is accelerated, verify customer's complaint and retest system. If DRB does not display increasing speed as vehicle is accelerated, see appropriate TESTS W/CODES - 3.0L article in ENGINE PERFORMANCE section.