Test 3A - Mic Odometer Problem
WARNING: This page is about a different car, the 1993 Eagle Vision, 1993 Dodge Intrepid, and 1993 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For connector terminal identification, see CONNECTOR IDENTIFICATION
. For wiring diagram, see WIRING DIAGRAMS
at the end of this article.
- Using DRB-II, select engine controller. Using DRB-II, read engine controller faults. If a vehicle speed sensor problem is indicated, refer to appropriate G - TESTS W/ CODES article in the ENGINE PERFORMANCE Section.
- If a vehicle speed sensor problem is not indicated, turn ignition off. Disconnect Mechanical Instrument Cluster (MIC). Check if odometer has been previously replaced. If odometer has not been replaced, replace odometer. Perform VERIFICATION PROCEDURE VER-1. If odometer has been replaced, replace body controller module. Perform VERIFICATION PROCEDURE VER-1.