LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 1994 >> Intrepid Base, 3.5 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Controls - Tests W/Codes - Body Control Computer) >> Verification Test >> Verification Procedure VER-1
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Verification Procedure VER-1

WARNING: This page is about a different car, the 1993 Eagle Vision, 1993 Dodge Intrepid, and 1993 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure ignition is off and DRB-II is connected. Turn ignition on. If DRB-II screen is blank, go to TEST 2A. If DRB-II screen is not blank, go to next step.
  2. If there is a bus failure message on DRB-II, go to TEST 1A. If there is no bus failure message on DRB-II, select module in question. If DRB-II shows NO RESPONSE, go to TEST 1A.
  3. If DRB-II does not show NO RESPONSE, inspect vehicle for original complaint. If original complaint is present, go to TEST 1A. If original complaint is not present, repair is complete.
scientia non olet · About LEMON Manuals