LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 1994 >> Stealth Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Controls - Remove/Install/Overhaul) >> Fuel System >> Throttle Position Sensor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

WARNING: This page is about a different car, the 1994 Mitsubishi Diamante. However, it is still accessible from the selected car via links, so may be relevant.

Throttle Position Sensor (TPS) is located on throttle body. Disconnect TPS electrical connector. Remove TPS screws and TPS. To install, reverse removal procedure. Tighten TPS screws to specification. See TORQUE SPECIFICATIONS  . For TPS adjustment procedure, see ADJUSTMENTS article in the ENGINE PERFORMANCE Section.