Test 1A - Identifying Vehicle Equipment & System Problems
- Connect scan tool to Data Link Connector (DLC). DLC is located under instrument cluster, next to center console. If scan tool screen is blank, go to TEST 115A
. If scan tool is not blank, go to next step.
- Turn ignition on. Using scan tool, select Body System. If scan tool does not display BUS OPERATIONAL, see appropriate BODY CONTROL COMPUTER. If scan tool displays BUS OPERATIONAL, go to next step.
- Using scan tool, select Body Computer. If scan tool does not display BUS OPERATIONAL, see BODY CONTROL COMPUTER. If scan tool displays BUS OPERATIONAL, go to next step.
- If scan tool displays TURN IGNITION ON, go to TEST 112A
. If scan tool does not display TURN IGNITION ON, go to next step.
- If scan tool displays NO RESPONSE, go to TEST 113A
. If scan tool does not display NO RESPONSE, go to next step.
- Using scan tool, select Input/Output and read Ign Run/Start state. If scan tool displays OPEN, go to TEST 112A
. If scan tool does not display OPEN, go to next step.
- Using scan tool, read Diagnostic Trouble Codes (DTCs). If any DTCs are displayed, go to TEST 1B. If no DTCs are displayed, see DIAGNOSTIC TEST DIRECTORY table for specific diagnosis.
DIAGNOSTIC TEST DIRECTORY
| Problem/Message |
Perform Test No. |
| Automatic Temp. Control (ATC) System |
TEST 2A |
| Manual A/C-Heater System (Non-ATC) |
TEST 25A |
| Chime System |
TEST 29A |
| Courtesy Lamp System |
TEST 34A |
| Headlamp System (Including Ultralight) |
TEST 43A |
| Illuminated Entry System |
TEST 53A |
| Electro/Mechanical Instrument Cluster |
TEST 54A |
| Key-In Lamp |
TEST 75A |
| Message Center |
TEST 78A |
| Overhead Travel Information System (OTIS) |
TEST 81A |
| Power Door Lock System |
TEST 87A |
| Power Door Lock System (With RKE) |
TEST 95A |
| Windshield Wiper System |
TEST 103A |