Spark Plug Cable Service: Installation
WARNING: This page is about a different variant/trim than selected.
- When installing the spark plug cables, make sure the coil and spark plug insulator and terminals are fully seated. A click sound should be heard or terminal engagement is felt when the terminals are properly attached.
- Install the cable into the retaining bracket. Make sure that they are also attached to the rear retaining clip mounted on the rear of the intake manifold.
- Install the resonator.
SPARK PLUG CABLE #1
- When installing the spark plug cables, make sure the coil and spark plug insulator and terminals are fully seated. A click sound should be heard or terminal engagement is felt when the terminals are properly attached.
- Rotate Generator back into place.
- Install upper Generator bracket with the four bolts.
- Install the accessory drive belt, Refer toCooling.