Test 85A - Testing OTIS Mileage & Distance Functions
NOTE:
For connector terminal identification and wiring diagrams, see BODY CONTROL COMPUTER
section in this article. Perform TEST VER-1
VERIFICATION TEST after each repair.
- Using scan tool, read Body Control Module (BCM) DTCs. If scan tool displays NO VEHICLE SPEED SENSOR SIGNAL, see appropriate articles. For LHS and New Yorker see TESTS W/CODES . For Concorde, Intrepid and Vision 3.3L see TESTS W/CODES - 3.3L . For Concorde, Intrepid and Vision 3.5L see TESTS W/CODES - 3.5L . If scan tool does not display NO VEHICLE SPEED SENSOR SIGNAL, go to next step.
- If scan tool shows THROTTLE POSITION SENSOR VOLTAGE HIGH, see appropriate articles. For LHS & New Yorker, see TESTS W/CODES . For Concorde, Intrepid & Vision 3.3L, see TESTS W/CODES - 3.3L . For Concorde, Intrepid & Vision 3.5L, see TESTS W/CODES - 3.5L . If scan tool does not display THROTTLE POSITION SENSOR VOLTAGE HIGH, go to next step.
- If scan tool display shows THROTTLE POSITION SENSOR VOLTAGE LOW, see appropriate articles. For LHS and New Yorker models, see TESTS W/CODES . For Concorde, Intrepid and Vision 3.3L models, see TESTS W/CODES - 3.3L . For Concorde, Intrepid and Vision 3.5L models, see TESTS W/CODES - 3.5L . If scan tool does not display THROTTLE POSITION SENSOR VOLTAGE LOW, replace BCM.