DRB Scan Tool
WARNING: This page is about a different car, the 1998 Dodge Intrepid and 1998 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
Refer to DRB scan tool instructions to retrieve and clear fault messages, and when performing other scan tool function.
DRB scan tool is grounded through DLC connector. Only one volt/ohmmeter test lead is required when instructed by testing to measure voltage or resistance on specified circuit. DRB scan tool volt/ohmmeter mode should only be used when body control computer tests require the use of this option.