Specifications Index
STEALTH SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | See MANUAL A/C-HEATER SYSTEMS SPECIFICATIONS TABLE located in *PLEASE READ THIS FIRST* . | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Axle Nut/Hub Nut | 145-188 Ft. Lbs. (197-255 N.m) | ||
| Battery | CAPACITIES | ||
| Brakes | |||
| Bleeding Sequence | |||
| Without ABS | BLEEDING BRAKE SYSTEM | ||
| With ABS | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | |||
| Service Specifications | DISC BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | See GENERATOR RATING under ALTERNATOR OUTPUT TEST . | ||
| Torque | N/A | ||
| Drive Belts | |||
| Adjustment | ACCESSORY DRIVE BELT ADJUSTMENT | ||
| Drive Belt Routing | ACCESSORY DRIVE BELT ADJUSTMENT | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | 11-15 psi | ||
| Thermostat R & I | |||
| DOHC | N/A | ||
| SOHC | N/A | ||
| TURBO | N/A | ||
| Water Pump R & I | |||
| DOHC | WATER PUMP | ||
| SOHC | WATER PUMP | ||
| TURBO | WATER PUMP | ||
| Engine Mechanical | |||
| 3.0L SOHC | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | Oil pressure should be at least 11 psi (.8 kg/cm2 ) at idle and engine oil temperature of 167-194°F (75-90°C). | ||
| Overhaul | GENERAL ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| 3.0L DOHC | |||
| Compression | ENGINE COMPRESSION | ||
| Oil pressure | Oil pressure should be at least 11 psi (.8 kg/cm2 ) at idle and engine oil temperature of 167-194°F (75-90°C). | ||
| Overhaul | GENERAL ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| 3.0L TURBO | |||
| Compression | ENGINE COMPRESSION | ||
| Oil pressure | Oil pressure should be at least 11 psi (.8 kg/cm2 ) at idle and engine oil temperature of 167-194°F (75-90°C). | ||
| Overhaul | GENERAL ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE/FLUIDS tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate/Drive Plate Torque | 55 Ft. Lbs. (75 N.m) | ||
| Fuel System | |||
| Pressure Specification | FUEL PUMP | ||
| Fuel Pressure Test Procedure | PRESSURE TESTING | ||
| Fuel Filter Location | N/A | ||
| Fuel Filter R & I | N/A | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER | ||
| Ignition Wires (Resistance) | HIGH TENSION WIRE RESISTANCE | ||
| Ignition Wires (Routing) | FIRING ORDER | ||
| Spark Plug | SPARK PLUGS | ||
| Starting | |||
| Starter | STARTER SPECIFICATIONS | ||
| Torque | N/A | ||
| Wheel Alignment | |||
| Adjustment Specifications | ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 87-101 Ft. Lbs. (118-137 N.m) | ||