Interior Light Test 1A - Identifying Interior Lighting System Problems
NOTE:
Perform SYMPTOM ID TEST 1A
before proceeding with this test. For connector terminal identification, refer to CONNECTOR IDENTIFICATION
. For wiring diagrams, refer to WIRING DIAGRAMS
. Perform, after each repair, VERIFICATION TEST VER-1A - VERIFICATION PROCEDURE
.
CAUTION:
Always turn ignition switch to OFF position prior to disconnecting or connecting any module connector.
Interior lighting system consists of courtesy lights and illuminated entry and key-in light. Identify problem(s) listed in INTERIOR LIGHT SYSTEM DIAGNOSTIC TEST DIRECTORY table and perform indicated test(s).
INTERIOR LIGHT SYSTEM DIAGNOSTIC TEST DIRECTORY
| Problem | Perform |
|---|---|
| Courtesy Light Inoperative With Any Door | INTERIOR LIGHT TEST 2A |
| Courtesy Light On Constantly | INTERIOR LIGHT TEST 3A |
| Courtesy Light Inoperative With Dome Light Switch | INTERIOR LIGHT TEST 4A |
| Courtesy Light Inoperative With LF Door | DOOR AJAR TEST 3A |
| Courtesy Light Inoperative With RF Door | DOOR AJAR TEST 5A |
| Courtesy Light Inoperative With Left Sliding Door | DOOR AJAR TEST 11A |
| Courtesy Light Inoperative With Right Sliding Door | DOOR AJAR TEST 7A |
| Courtesy Light Inoperative With Liftgate | DOOR AJAR TEST 9A |
| Illuminated Entry Inoperative With RKE Transmitter | POWER DOOR LOCK TEST 1A |
| Illuminated Entry Inoperative With Driver's Door Key Cylinder | POWER DOOR LOCK TEST 5A |