Window Switch Test
- Remove window switch. See WINDOW SWITCH R & I
. Using ohmmeter, check continuity of switch. See appropriate table:
See Fig 1 or Fig 2 . If switch continuity is not as specified, replace switch.
- Vehicle is equipped with an auto down feature. Driver's window can be lowered without having to hold switch in down position. Auto down feature can be activated by pressing down switch past first detent.
- To test auto down feature, reinstall and operate switch in normal up and down mode. If window operates properly in normal mode, but does not operate in auto down mode, replace switch.
DRIVER'S WINDOW SWITCH CONTINUITY
| Switch Position | Continuity Between Terminals No. | |
|---|---|---|
| OFF | 2 & 8; 3 & 8; 4 & 8; 6 & 8; 7 & 8; 8 & 9; 8 & 10; 8 & 11 | |
| Up | ||
| Driver | 5 & 11; 8 & 10 | |
| Passenger | 5 & 6; 7 & 8 | |
| Left Rear | 3 & 8; 4 & 5 | |
| Right Rear | 2 & 5; 8 & 9 | |
| Down | ||
| Driver | 5 & 10; 8 & 11 | |
| Passenger | 5 & 7; 6 & 8 | |
| Left Rear | 3 & 5; 4 & 8 | |
| Right Rear | 2 & 8; 5 & 9 | |
| Window Lock | 1 & 5 | |
PASSENGER'S WINDOW SWITCH CONTINUITY
| Switch Position | Continuity Between Terminals No. |
|---|---|
| Off | 2 & 5; 3 & 6 |
| Up | 3 & 6; 4 & 5 |
| Down | 2 & 5; 3 & 4 |