Trouble Code Repair Procedure
- If verification is for an A/C fault, verify A/C is operating during the road test.
- Turn ignition off for at least 10 seconds. Restart vehicle and run for 2 minutes. If starts since set and a good trip (when applicable) changed to one or more, stop. Repair is complete. If starts since did not set and good trip (when applicable) did not set, go to next step.
- Road test vehicle. Drive for at least 10 minutes, shift through all gears and attain at least 40 MPH. Stop once during trip and turn ignition off. Restart engine and continue.
- If starts since set and a good trip (when applicable) changed to one or more, stop. Repair is complete. If starts since did not set and good trip (when applicable) did not set, go to next step.
- Using scan tool, check for stored DTCs. If another DTC exists, return to DTC TEST and follow path specified by other DTC. If no other DTCs exist or symptom is no longer present, repair is now complete.