LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 1999 >> Durango 5.9 Z, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Computer >> Audio System >> Shorted Right Channel
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Shorted Right Channel

NOTE: For connector terminal identification and wiring diagrams, see BODY CONTROL COMPUTER - INTRODUCTION article. Perform VERIFICATION TEST VER-1A  after each repair.
  1. Disconnect amplifier 10-pin connector C2. Amplifier is located under right side of instrument panel in cowl area. Turn radio on. Using an external voltmeter, measure voltage between ground and amplifier 10-pin connector C2 terminal No. 9 (Dark Blue/White wire). If voltage is 4.5-5.5 volts, go to next step. If voltage is not 4.5-5.5 volts, repair ground in Dark Blue/White wire.
  2. Measure voltage between ground and amplifier 10-pin connector C2 terminal No. 3 (Dark Blue/Orange wire). If voltage is 4.5-5.5 volts, go to next step. If voltage is not 4.5-5.5 volts, repair ground in Dark Blue/Orange wire.
  3. Measure voltage between ground and amplifier 10-pin connector C2 terminal No. 6 (Violet wire). If voltage is 4.5-5.5 volts, go to next step. If voltage is not 4.5-5.5 volts, repair ground in Violet wire.
  4. Measure voltage between ground and amplifier 10-pin connector C2 terminal No. 2 (Dark Blue/Red wire). If voltage is 4.5-5.5 volts, replace radio. If voltage is not 4.5-5.5 volts, repair ground in Dark Blue/Red wire.
scientia non olet · About LEMON Manuals