LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 1999 >> Durango 5.9 Z, 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Component Remove/Install/Overhaul - RWD - Gasoline >> Fuel System >> Fuel Level Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Level Sensor: Installation

  1. Install fuel level sensor on channels of fuel pump module. Ensure wires are properly routed. Slide fuel level sensor onto fuel pump module until fuel level sensor snaps into place. Ensure locking tab is fully seated.
  2. Install wires for fuel level sensor in electrical connector for fuel pump and fuel level sensor. Install locking collar. Install electrical connector for fuel pump and fuel level sensor on electrical connector on bottom side of electrical connector mounted on top of fuel pump module. Reinstall fuel pump module. To complete installation, reverse removal procedure.
Fig 1: Locating Fuel Level Sensor, Fuel Pump & Fuel Pump Inlet Strainer On Typical Fuel Pump Module
G98C01604Courtesy of CHRYSLER LLC
scientia non olet · About LEMON Manuals