LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 1999 >> Intrepid Base, 2.7 R >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Engine Testing >> Fuel System >> V6 Fuel Pressure Release >> Cirrus, Concorde, Intrepid, LHS, Sebring Convertible, Stratus & 300M
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cirrus, Concorde, Intrepid, LHS, Sebring Convertible, Stratus & 300M

  1. Remove fuel pump relay. Fuel pump relay is located in power distribution center at driver's side front corner of engine compartment, just in front of strut tower.
  2. Start engine and allow engine to idle until engine stalls. Attempt to restart engine until engine will no longer run. Turn ignition off.
    CAUTION: Ensure steps  1 and  2 are performed before proceeding.
  3. Reinstall fuel pump relay. Fuel system components may now be serviced. Cover fuel lines with shop towel before disconnecting, as some residual fuel pressure may exist.
  4. Diagnostic Trouble Code (DTCs) may have been stored in Powertrain Control Module (PCM) due to the removal of fuel pump relay. Using scan tool, clear DTCs from PCM. See appropriate SELF-DIAGNOSTICS article for clearing of DTCs.
scientia non olet · About LEMON Manuals