LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 1999 >> Intrepid ES, 2.7 R >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System & Component Testing - Except Coupe >> Ignition System >> Engine Controls - System & Component Testing - Except Coupe >> Ignition Coil (Except 2.5L & Coil-On-Plug System)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Coil (Except 2.5L & Coil-On-Plug System)

  1. Coil No. 1 fires cylinders No. 1 and 4. Coil No. 2 fires cylinders No. 2 and 3. Disconnect coil pack connector. Using an ohmmeter, measure primary resistance between coil pack connector center terminal (battery positive) and each outside terminal (coil negative). See IGNITION COIL SPECIFICATIONS (EXCEPT 2.5L)  . If primary resistance is not as specified, replace coil pack.
  2. Remove spark plug wires from coil. Measure secondary resistance between towers of each individual coil. See IGNITION COIL SPECIFICATIONS (EXCEPT 2.5L)  . If secondary resistance is not as specified, replace coil pack.
IGNITION COIL SPECIFICATIONS (EXCEPT 2.5L)

Application Specification
Primary Resistance
2.0L & 2.4L .45-.65 Ohm
2.7L, 3.2L & 3.5L .4-.6 Ohm
Secondary Resistance
2.0L & 2.4L
Breeze, Cirrus & Stratus 10,900-14,700 Ohms
Neon 11,000-14,000 Ohms
Sebring Convertible 7000-15,800 Ohms
2.7L, 3.2L & 3.5L
Concorde, Intrepid, LHS & 300M (1)
(1) Information is not available from manufacturer.
scientia non olet · About LEMON Manuals