2.4L, 3.3L & 3.8L
- Ensure ignition is off. Disconnect negative battery cable. Remove fuel tank filler cap. Remove protective cap from service port on fuel rail.
- On 2.4L, service port is located near front (timing belt end) of fuel rail. On 3.3L and 3.8L, service port is located near center of front (radiator side) fuel rail.
- On all models, place end of Hose (C-4799-1) into an approved fuel container. Attach remaining end of hose at service port on fuel rail. Use care, as fuel system may be under pressure. Fuel pressure will be released from fuel system. Remove hose, reinstall protective cap, fuel tank filler cap and negative battery cable.