LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2000 >> Caravan Base, 2.4 B >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Diagnostic Tests >> Test VER-6A: Leak Detection Pump (LDP) Verification >> Final Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Final Procedure

  1. Inspect vehicle to ensure all components related to the repair are properly connected. Reassemble and reconnect components as necessary. If any DTCs have not been diagnosed, perform appropriate DTC test and finish diagnosing remaining DTCs as necessary. If all DTCs have been diagnosed and repaired, go to next step.
  2. Using scan tool perform LDP monitor test by following screen prompts on scan tool. If LDP monitor fails, repaired DTC has reset, or any DTCs exist, repair is not complete. Check for related Technical Service Bulletins (TSBs) and proceed to appropriate DTC test. If LDP monitor runs and test does not fail, condition is no longer present. If no DTCs exists and all components function properly, repair is complete.
scientia non olet · About LEMON Manuals