Mode 1

WARNING: This page is about a different car, the 2000 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.

Mode 1 clears soft limits and sets memory selector switches (1 and 2) to default settings. To enter mode 1, press and hold S and 1 buttons for 5 seconds. Mode 1 will exit when tasks are completed or when RKE data input circuit is grounded (transmission is shifted out of Park). Mode 1 will:

Clear all soft limits to their default hard limit values.
Default memory 1 to full back, full down front, full down back and recliner full back.
Default memory 2 to full forward, full up front, full up back and recliner full forward.