VTSS Verification Test
WARNING: This page is about a different car, the 2000 Dodge Ram Wagon and 2000 Dodge Ram Van. However, it is still accessible from the selected car via links, so may be relevant.
- Close hood, tailgate and all doors. Open driver's door. Remove ignition key. Lock doors using Remote Keyless Entry (RKE) transmitter. Close driver's door. If Vehicle Theft Security System (VTSS) indicator flashes, system is functioning properly at this time. If VTSS indicator does not flash, go to next step.
- Using scan tool, clear Diagnostic Trouble Codes (DTC). Turn ignition off and wait 5 seconds. Turn ignition on. Using scan tool read DTCs from all modules. If any DTCs are present, go to DIAGNOSTIC TROUBLE CODE IDENTIFICATION table under SELF-DIAGNOSTIC SYSTEM and perform corresponding test(s). If no DTCs are present but customer complaint can be duplicated, go to SYMPTOM IDENTIFICATION table under SELF-DIAGNOSTIC SYSTEM and repair by symptom. If no DTCs are present and customer complaint cannot be duplicated, repair is complete.