Toe-In Adjustment (Front)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2004 Dodge Intrepid, 2004 Chrysler Concorde, 2004 Chrysler 300M, 2003 Dodge Intrepid, and 2003 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
When performing 4-wheel alignment, rear camber and toe adjustment must be set to specification first, then adjust front wheels to specification.
NOTE:
On vehicles equipped with tie rod adjustment sleeve, ensure exposed threaded area between tie rod and adjustment sleeve does not exceed .79" (20 mm).
With steering wheel centered, loosen tie rod end pinch bolt. While holding steering rod dust boots stationary, rotate tie rod adjustment sleeve to obtain specified toe-in. See WHEEL ALIGNMENT SPECIFICATIONS . Tighten pinch bolt to specification. See TORQUE SPECIFICATIONS .