All Doors Fail To Lock & Unlock From Any Switch
- Turn headlights on. If headlights operate, go to next step. If headlights do not operate, diagnose headlight system first. See HEADLIGHT SYSTEMS article.
- Turn ignition off. Disconnect Gray 16-pin Central Timer Module (CTM) connector C2. CTM is located behind left side kick panel. Disconnect any Black 4-pin power door lock motor connector, located in rear of door. Using DVOM, measure resistance of Orange/Black wire between Black 4-pin power door lock motor connector terminal No. 4 and Gray 16-pin CTM connector C2 terminal No. 4. See Figure . If resistance is 5 ohms or less, go to next step. If resistance is more than 5 ohms, repair open in Orange/Black wire between Black 4-pin power door lock motor connector terminal No. 4 and Gray 16-pin CTM connector C2 terminal No. 4.
- Replace CTM. See CENTRAL TIMER MODULE under REMOVAL & INSTALLATION.