LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2001 >> Durango 5.9 Z, 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Verification Tests >> Skis Verification Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Skis Verification Test

NOTE: Sentry Key Immobilizer Module (SKIM) will only remain in secured access mode for 60 seconds. If incorrect unique Personal Identification Number (PIN) is entered 3 times, SKIM will be locked for one hour. Turn off all accessories and connect battery charger if necessary. To unlock SKIM, turn ignition on for one hour. When SKIM is locked, scan tool will display BUS +/- SIGNALS OPEN.
  1. Reconnect all previously disconnected components and connectors. Obtain vehicle's unique PIN assigned to SKIM from vehicle owner or manufacturer. Remove all test equipment and jumper wires. Using scan tool, select THEFT ALARM, SKIM, MISCELLANEOUS, then select desired procedure and follow steps displayed on scan tool. If SKIM has been replaced, ensure all keys and remote transmitters to be used with vehicle are programmed into SKIM.
  2. Using scan tool, clear Diagnostic Trouble Codes (DTC) from SKIM. Perform 5 ignition cycles (key on/key off) leaving key on for 90 seconds per key cycle. Using scan tool, retrieve DTCs from SKIM. If no SKIM DTCs exist, system is operating correctly and customer's complaint cannot be duplicated, repair is complete. If SKIM DTCs exist, perform appropriate test. See DTC MESSAGES & CODES  table under DIAGNOSTIC TROUBLE CODE DEFINITIONS.