LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2001 >> Durango 5.9 Z, 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Verification Tests >> Test VER-2: Powertrain Verification >> Final Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Final Procedure

  1. Inspect vehicle to ensure all components related to the repair are properly connected. Reassemble and reconnect components as necessary. Using scan tool, clear DTCs from PCM and reset all values in adaptive memory. If repair procedure did include replacing PCM, go to next step. If repair procedure did not include replacing PCM, go to step  4.
  2. Using scan tool, read PCM DTCs. If PCM has been replaced and correct VIN and mileage have not been programmed, a DTC will be set in ABS and SRS modules. If necessary, enter correct VIN and mileage in PCM and use scan tool to clear DTCs from ABS and SRS modules. Road test vehicle at 40 MPH for 5 minutes. If verification test is for an A/C system DTC, ensure A/C system operates during road test. Ensure transmission upshifts through all gears. Bring vehicle to a stop and turn engine off for at least 10 seconds. Go to next step.
  3. Ensure transmission upshifts through all gears. Bring vehicle to a stop and turn engine off for at least 10 seconds. Using scan tool, read PCM DTCs. If DTC has reset, perform appropriate test. See DTC MESSAGES & CODES  table under DIAGNOSTIC TROUBLE CODE DEFINITIONS. If original DTC did not reset and no new DTCs are set in memory, system is operating correctly and repair is complete.
  4. Road test vehicle at 40 MPH for 5 minutes. If verification test is for an A/C system DTC, ensure A/C system operates during road test. Ensure transmission upshifts through all gears. Bring vehicle to a stop and turn engine off for at least 10 seconds. Using scan tool, read PCM DTCs. If DTC has reset, perform appropriate test. See DTC MESSAGES & CODES  table under DIAGNOSTIC TROUBLE CODE DEFINITIONS. If original DTC did not reset and no new DTCs are set in memory, system is operating correctly and repair is complete.
scientia non olet · About LEMON Manuals